Concepts
  Gun Reviews
  Modifications
  Repairs
  Waterballoons
  Statistical Database
  Weaponry Editorials


  Offense
  Defense
  Ambushes
  Night Operations
  Communication
  Movement
  Ranger's Guide
  Scout's Guide
  Sniper's Guide
  Tactical Editorials


  War Stories
  Video
  Game Ideas
  Hosting a War


  Strategy War Games
  Facebook
  Forums
  Other Websites


Hydrowar > Arms Room > Gun Reviews > Super Soaker XP 310

Statistics


Marketed: 2000
Classification: Rifle
Suggested Uses: Scouting, casual soakfests
Dimensions: 21.2" x 3" x 10"
Weight Empty: 1.77 lb
Weight Full: 4.96 lb
Weight Full & Charged: 5.67 lb

Pump Stroke Length: 7"
Pump Volume: 1.2 oz
Pumps to 100%: 11
Reservoir Volume: 49 oz
Firing Chamber Volume: 11 oz

Nozzle Sizes: 1 mm, 1.2 mm, 1.6 mm, 2 mm
Shots/Tank: between 7 full, 41 burst (+1, 9 when pre-pressurized) on 2 mm, to 7 full and 122 burst (+1, 14 when pre-pressurized) burst on 1 mm
Output/sec 2 mm: 2.4 oz (2x)
Shot Time ≥ 70% range 2 mm: 3 sec

Max Range 2 mm: 35.5 ft

Output/sec 1.6 mm: 1.4 oz (1.2x)
Shot Time ≥ 70% range 1.6 mm: 5.3 sec

Max Range 1.6 mm: 35.5 ft

Output/sec 1.2 mm: 1 oz (0.83x)
Shot Time ≥ 70% range 1.2 mm: 7.2 sec

Max Range 1.2 mm: 35.5 ft

Output/sec 1 mm: 0.8 oz (0.67x)
Shot Time ≥ 70% range 1 mm: 9 sec

Max Range 1 mm: 35.5 ft

Performance Review
For soakfests the XP 310 is one of the guns you can choose to use.  It's light, it has a great capacity/output ratio, and you can pump and shoot it at the same time, thus increasing your shot time indefinitely.  When fighting with the 310, you should get in close, pump while shooting, and use your maneuverability to dodge as best as possible.  The 1.6 mm nozzle (2nd largest) is a good choice for standard engagements.  The 2 smaller nozzles are not much different from each other, so I recommend sawing one off or drilling it into a shotgun blast for cqb.

Despite it's ability to deliver the goods in a heated soakfest, the 310 falls a little short in the 1hk and elimination gaming.  My main problem with the XP 310 is its range.  Range is everything in elimination gaming.  I have tested 2 310s, and they both max out at 34 ft.  Although this is about average for an air pressure watergun, you have several similarly sized options that shoot a good 3ft further - the Max D 6000, SC 600 mk2, and SS 100 mk2.


Structural Review
Why does this gun shoot only 34 ft?  Look at the internals of the weapon.  Water must make a steep 45 degree, or greater, climb, up 3 inches of pipe, before exiting out the nozzle.  Other air pressure guns, which use pull valves, like the XP 110 or XP 70 have a much straighter path, from the pressure chamber to the nozzle.  Both my XP 70 and my XP 110 shoot a foot and a half further than my XP 310.  The reason that the Max D 6000 shoots further is because of it's ball valve nozzle system.  With that being said, I would still buy an XP 310 over a Max D 6000 simply because the ball valve on a 6000 will break over time, where as you can count on your XP 310 to be there for you if you take good care of it.

Another difference between the 110 and 310 is that on the 310 (and 6000) the pipes are glued together here.  On the XP 110 and XP 105 (which preceded the 310) they are fitted together using rubber o rings on the ends of the "male" pipe couplings. The pipes and the trigger/nozzle system are quite durable and made out quality parts. The reservoir and firing chambers are fitted in to the pipes using rubber o rings on the ends of the reservoir/firing chambers.

Overall, the XP 310 is very structurally sound. The only parts that are somewhat vulnerable are the springs used behind the trigger and around the firing pin. With repeated use, and without the proper care, these can grow weak, which may cause the XP 310 to continue firing after the trigger is no longer being squeezed. If this happens I recommend using rubber bands to support the firing pin.


Pros: Ammo lasts a long time, easy to us

Cons: Doesn't excel at any 1 thing

Modding Potential: ||||||||||
Recommended Mods: Pump reinforcement, nozzle drill  Potential Mods: Custom strap, nozzle drill, check valve removal, pc expansion, pump reinforcement


Capacity
||||||||||
In. Durability
||||||||||
Ex. Durability
||||||||||
Power
||||||||||
Range
||||||||||
Soakage
||||||||||
Shot Time
||||||||||
Weight
||||||||||
Overall Avg: 5.125
||||||||||
Note: More bars = better, thus high bars in weight = less weight.


Recommendation: Yes


In Action Photos (click photo to view larger size):
  
Content management by marauder_4. What else?
Hydrowar is Copyright 2000-2011 Benjamin Hemingway, all rights reserved.
Hydrowar is in no way sponsored or funded by the Hasbro corporation. We are an independent site by the fans.

Privacy Policy  - 
About Hydrowar  -  Sitemap  -  Archives  -  Comics  -  Buy CPS